MIL-M-38510-310 Microcircuits, Digital, Bipolar Low-Power Schottly Ttl, And Gates Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive AND logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21

INCH-POUND

MIL-M-38510/310D

3 October 2002__ SUPERSEDING

MIL-M-38510/310C

28 April 1982

DETAIL SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR LOW-POWER SCHOTTKY TTL, AND GATES, MONOLITHIC SILICON

Inactive for new design after 18 April 1997.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive AND logic gate microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL- M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part number.  The part number shall be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types shall be as follows: Device type                                                   Circuit

01                                       Triple, 3-input AND gate

02                                       Triple, 3-input AND gate (open collector output)

03                                       Dual, 4-input AND gate

04                                       Quad, 2-input AND gate

05                                       Quad, 2-input AND gate (open collector output)

1.2.2  Device class.  The device class shall be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines shall be as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

1/  Inactive case outline package (see MIL-STD-1835).

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                                                                                                             FSC 5962

DISTRIBUTION STATEMENT A.  Approved for public release; distribution is unlimited.