INCH-POUND MIL-M-38510/156C
28 MARCH 2005
SUPERSEDING MIL-M-38510/1568
21 JULY 1986
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, TTL, DATA ENCODERS, MONOLITHIC SILICON Inactive for new design after 21 July 1986
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, TTL, data encoder, microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4)
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types should be as follows: Device type Circuit
01 Ten line to four line data encoder, without enable.
02 Eight line to three line data encoder, with enable.
03 Eight-input priority encoder.
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style
E |
GDIP1-T16 or CDIP2-T16 |
16 |
Dual-in-line |
F |
GDFP2-F16 or CDFP3-F16 |
16 |
Flat pack |
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East 8road St., Columbus, OH 43218-3990, or email mailto:bipolar@dscc.dla.mil . Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil .
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business