MIL-M-38510-128 Microcircuits, Linear, Programmable Voltage References, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, programmable voltage references. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17

MIL-M-38510/128A

1.3  Absolute maximum ratings.

Supply voltage (VIN)  .................................................................................................   40 V Power dissipation .....................................................................................................   600 mW Lead temperature (soldering, 10 seconds) ...............................................................   +300°C

Storage temperature  ................................................................................................   -65°C to +175°C Operating junction temperature  (TJ).........................................................................   -55°C to +150°C

1.4  Recommended operating conditions.

Supply voltage range ..................................................................................  4.5 V minimum to 30 V maximum

Output current (max) ..................................................................................  5 mA

Ambient operatingt temperature range (TA)  ...............................................  -55°C to +125°C

1.5  Power and thermal characteristics.

Case outline           Maximum allowable power dissipation  1/   Maximum εJC     2/        Maximum εJA

G                              330 mW @ TA = 125°C                          40°C/W                     150°C/W

2.  APPLICABLE DOCUMENTS

2.1  General.  The documents listed in this section are specified in sections 3, 4, or 5 of this specification.  This section does not include documents cited in other sections of this specification or recommended for additional information or as examples.  While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.1.1  Specifications, standards, and handbooks.  The following specifications and standards form a part of this specification to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-38535     -   Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883      -   Test Method Standard for Microelectronics.

MIL-STD-1835    -   Interface Standard Electronic Component Case Outlines.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA  19111-5094.

2.2  Order of precedence.  In the event of a conflict between the text of this specification and the references cited herein the text of this document shall takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

1/    All leads welded or soldered to PC board.

2/    Applies only when TC  75°C

2