MIL-M-38510-328 Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Bus Transceivers With Three State Outputs, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, bus transceivers with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71

TABLE III.  Group A inspection for device type 04.

Terminal conditions (pins not designated may be high � 2.0 V; low s 0.7 V; or open).

TABLE III.  Group A inspection for device type 04.

Terminal conditions (pins not designated may be high � 2.0 V; low s 0.7 V; or open).

1/  Tests shall be performed in sequence, attributes data only.

2/  H > 1.5 V; L < 1.5 V.

3/  A = 3.0 V minimum; B = 0.0 V or GND.                                                                                                          ┌──┐     2.5 V/5.5 V);

4/  Prior to test, bus registers are loaded high by placing 4.5 V on bus data and applying one clock pulse (  ─┘     └─   0 V

the bus is then placed at GND for the duration of the test.

┌──┐     2.5 V/5.5 V);

5/  Prior to test, bus registers are loaded low by placing GND on bus data and applying one clock pulse (    ─┘     └─   0 V

the bus is then placed at 4.5 V for the duration of the test.