multiplexers three-state microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69

INCH POUND

MIL-M-38510I79D

17 AUGUST 2005

SUPERSEDING MIL-M-38510I79C

5 NOVEMBER 1987

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL,

DATA SELECTORS I MULTIPLEXERS WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

Inactive for new design after 23 August 1996.

This specification is approved for use by all Depart- ments and Agencies of the Department of Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.

1. SCOPE

1.1 Scope. This specification covers the detail requirements for monolithic silicon, Schottky TTL, data selectors I multiplexers (three-state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-

38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1 Device type. The device type is as follows:

Device type Circuit

01 8 input, data selector I multiplexer

02 Dual, 4-input, data selector I mutiplexer

03 Quad, 2-input, data selector I multiplexer

04 Quad, 2-input, data selector I multiplexer with inverted output

05 8-input, data selector I mutiplexer with 3-state outputs

06 Quad, 2-input, data selector I multiplexer with 3-state outputs

07 Quad, 2-input, data selector I multiplexer with 3-state inverted output

08 Dual, 4-input, data selector I multiplexer with 3-state outputs

1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:

Outline letter	Descriptive designator	Terminals	Package style
E	GDIP1-T16, CDIP2-T16	16	Dual in line package
F	GDFP2-F16, CDFP3-F16	16	Flat Package
2	CQCC1-N20	20	Square chip
X	CQCC2-N20	20	Square chip carrier package

Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil . Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at http:IIassist.daps.dla.mil .

AMSC NIA FSC 5962