MIL-M-38510-70 Microcircuits, Digital, Bipolar, Schottky Ttl, Nand Gaits, Monolithic SiliconThis specification covers the detail requirements for monolithic, silicon, Schottky TTL, positive NAND logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49

INCH-POUND

MIL-M-38510/70C

2 November 2005

SUPERSEDING MIL-M-38510/70B

22 November 1985

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL, NAND GATES, MONOLITHIC SILICON

Inactive for new design after 6 September 1996.

This specification is approved for use by all Depart- ments  and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic, silicon, Schottky TTL, positive NAND logic gate microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535 and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                   Circuit

01                                           Quadruple, 2-input positive NAND gate

02                                           Quadruple, 2-input positive NAND gate (open collector output)

03                                           Hex, 1-input inverter gate

04                                           Hex, 1-input inverter gate (open collector output)

05                                           Triple, 3-input positive NAND gate

06                                           Dual, 4-input positive NAND gate

07                                           Dual, 4-input positive NAND gate (open collector output)

08                                           Single, 8-input positive NAND gate

09                                           Single, 13-input positive NAND gate

10                                           Single, 12-input positive NAND gate (three state output)

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                           FSC 5962