MIL-M-38510-653 Microcircuits, Digital, High Speed, Cmos Flip-Flops, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70

INCH-POUND MIL-M-38510/6538

17 January 2006

SUPERSEDING MIL-M-38510/653A

15 January 1988

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, HIGH-SPEED CMOS, FLIP-FLOPS, MONOLITHIC SILICON, POSITIVE LOGIC

Reactivated after 17 Jan. 2006 and may be used for new and existing designs and acquisitions.

This specification is approved for use by all Departments and  Agencies  of the Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number (PIN).  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

1.2   Part or identifying number (PIN).  The PIN is in accordance with MIL-PRF-38535 and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                              Circuit

01                                       Dual JK flip-flop with clear

02                                       Dual D positive-edge triggered flip-flop with clear and preset

03                                       Dual JK negative-edge triggered flip-flop with clear

04                                       Dual JK positive-edge triggered flip-flop with clear and preset

05                                       Dual JK negative-edge triggered flip-flop with clear and preset

06                                       Quad D-type flip-flop with 3-state outputs and clear

07                                       Hex D-type flip-flop with clear

08                                       Quad D-type flip-flop with clear

52        Dual D-type positive-edge triggered flip-flop with clear and preset, TTL compatible inputs

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows:

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAC, P.O. 8ox 3990, Columbus, OH 43218-3990, or email CMOS@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/.

AMSC N/A                                                                                                                                                     FSC 5962