MIL-M-38510-5 Microcircuits, Digital, Ttl, And-Or-Invert Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, AND-OR-INVERT logic gating microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24

INCH-POUND MIL-M-38510/5D

1 June 2004

SUPERSEDING MIL-M-38510/5C

20 May 1985

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, TTL,

AND-OR-INVERT GATES, MONOLITHIC SILICON

Inactive for new design after 07 September 1995.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, TTL, AND-OR-INVERT logic gating microcircuits.  Two product assurance classes and a choice of case outlines/lead finish are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                   Circuit

01                                       Expandable Dual 2-wide, 2-input AND-OR-INVERT gate

02                                       Dual 2-wide, 2-input AND-OR-INVERT gate

03                                       Expandable 4-wide, 2-input AND-OR-INVERT gate

04                                       4-wide, 2-input AND-OR-INVERT gate

1.2.2  Device class.  The device class is  the product assurance level as defined in  MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.

AMSC N/A                                                                                                                                             FSC 5962