MIL-M-38510-40 Microcircuits, Digital, Ttl, High Speed, And-Or-Invert Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, HIGH-SPEED, and-or-invert logic gating microcircuits. One product assurance class and a choice and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25

INCH-POUND

MIL-M-38510/40B

2 December 2005

SUPERSEDING MIL-M-38510/40A

13 April 1984

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, TTL, HIGH SPEED, AND-OR-INVERT GATES, MONOLITHIC SILICON

Inactive for new design after 13 April 1984.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, TTL, HIGH SPEED, AND-OR- INVERT logic gating microcircuits.  One product assurance class and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535.

1.2.1  Device types.  The device types are as follows:

Device type                                                Circuit

01                                               Expandable dual 2-wide, 2-input AND-OR-INVERT gate

02                                               Dual 2-wide, 2-input AND-OR-INVERT gate

03                                               Expandable 2-2-2-3 input AND-OR-INVERT gate

04                                               2-2-2-3 input AND-OR-INVERT gate

05                                               Expandable 2-wide, 4-input AND-OR-INVERT gate

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter               Descriptive designator                    Terminals              Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                                 FSC 5962