MIL-M-38510-334 Microcircuits, Digital, Bipolar Advanced Schottky Ttl, And-Or-Invert Gates, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive AND-OR-INVERT logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

INCH-POUND

MIL-M-38510/334C

10 December 2003

SUPERSEDING MIL-M-38510/334B

25 October 1984

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR ADVANCED SCHOTTKY TTL, AND-OR-INVERT GATES, MONOLITHIC SILICON

Reactivated after 10 December 2003 and may be used for either new or existing design acquisition.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive AND-OR-INVERT logic gate microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part or Identifying Number (PIN).  The PIN should be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                   Circuit

01                                       4-2-3-2 input positive AND-OR-INVERT gate

1.2.2  Device class.  The device class should be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines should be as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or emailed to bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.

AMSC N/A                                                                                                                                             FSC 5962