MIL-M-38510-321 Microcircuits, Digital, Low-Power Schottky Ttl, Buffers/Drivers, Open Collector Output, High Voltage, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, buffers/drivers microcircuits with open collector high voltage outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

INCH-POUND

MIL-M-38510/321C

14 July 2003

SUPERSEDING MIL-M-38510/321B

12 August 1983

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, LOW-POWER SCHOTTKY TTL, BUFFERS/DRIVERS, OPEN COLLECTOR OUTPUT, HIGH VOLTAGE, MONOLITHIC SILICON

Inactive for new design after 18 April 1997.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, buffers/drivers microcircuits with open collector high voltage outputs.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part number.  The part number should be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                   Circuit

02                                       Quad 2-input inverter buffer/driver, 15-volt output

1.2.2  Device class.  The device class should be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines should be as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43216-5000, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                                                                                                             FSC 5962

DISTRIBUTION STATEMENT A.  Approved for public release; distribution is unlimited.