MIL-M-38510-313 Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Schmitt Trigger Positive Nand Gates And Inverters, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, Schmitt trigger positive NAND gate and inverter microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

INCH-POUND MIL-M-38510/313B

23 May 2003      _ SUPERSEDING

MIL-M-38510/313A

22 July 1983

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR LOW-POWER SCHOTTKY TTL, SCHMITT TRIGGER POSITIVE NAND GATES AND INVERTERS, MONOLITHIC SILICON

Inactive for new design after 18 April 1997.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, Schmitt trigger positive NAND gate and inverter microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part number.  The part number should be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                   Circuit

01                                       Dual 4 input, Schmitt trigger positive NAND gate

02                                       Hex Schmitt trigger inverter

03                                       Quad 2 input Schmitt trigger positive NAND gate

1.2.2  Device class.  The device class should be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines should be as designated in MIL-STD-1835 and as follows: Outline letter              Descriptive designator                    Terminals              Package style

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43216-5000, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                                                                                                             FSC 5962

DISTRIBUTION STATEMENT A.  Approved for public release; distribution is unlimited.