MIL-M-38510-23 Microcircuits, Digital, Ttl, High Speed, Nand Gates Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, high speed, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

INCH-POUND MIL-M-38510/23D

11 July 2003

SUPERSEDING MIL-M-38510/23A

14 July 1972

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, TTL, HIGH SPEED, NAND GATES MONOLITHIC SILICON

This specification is approved for use by all Departments and Agencies of the Department of Defense.

Inactive for new design after 06 September 1996

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, TTL, high speed, positive NAND logic gating microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

1.2  Part number.  The part number should be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                    Circuit

01                                             Single, 8-input, positive NAND gate

02                                             Dual, 4-input, positive NAND gate

03                                             Triple, 3-input, positive NAND gate

04                                             Quadruple, 2-input, positive NAND gate

05                                             Hex, 1-input, inverter gate

06                                             Quadruple, 2-input positive NAND gate (open collector output)

07                                             Dual, 4-input positive NAND gate (open collector output)

1.2.2  Device class.  The device class should be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outline.  The case outline should be as designated in MIL-STD-1835 and as follows:

Outline letter          Descriptive designator                  Terminals                    Package style

1/  Inactive package case outline.

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P.O. Box 3990, Columbus, OH 43216-5000, using the self addresses Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                                                                                                           FSC 5962

DISTRIBUTION STATEMENT A.  Approved for public release; distribution is unlimited.