MIL-M-38510-190 Microcircuits, Linear, Cmos/Analog Multiplexers/Demultiplexers With Overvoltage Protection, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, CMOS/Analog logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84

INCH-POUND MIL-M-38510/190D

12 October 2005

SUPERSEDING MIL-M-38510/190C

22 October 1986

MILITARY SPECIFICATION

MICROCIRCUITS, LINEAR, CMOS/ANALOG MULTIPLEXERS/DEMULTIPLEXERS WITH OVERVOLTAGE PROTECTION, MONOLITHIC SILICON, POSITIVE LOGIC

This specification is approved for use by all Departments and Agencies of the Department of Defense.

Inactive for new design as of 10 July 1995

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, CMOS/Analog logic microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4)

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                                   Circuit

01                                                             Single 16-channel MUX/DEMUX

02                                                             Single 16-channel MUX/DEMUX with overvoltage protection

03                                                             Differential 8-channel MUX/DEMUX

04                                                             Differential 8-channel MUX/DEMUX with overvoltage protection

05                                                             Single 8-channel MUX/DEMUX with overvoltage protection

06                                                             Differential 4-channel MUX/DEMUX with overvoltage protection

07                                                             Single 8-channel MUX/DEMUX

08                                                             Differential 4-channel MUX/DEMUX

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outline.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter          Descriptive designator                  Terminals                    Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or email mailto:linear@dscc.dla.mil .  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil .

AMSC N/A                                                                                                                                           FSC 5962