INCH-POUND
MIL-M-38510/19A
7 June 2005
SUPERSEDING
MIL-M-38510/19(USAF)
14 February 1975
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, TTL, PARITY GENERATORS/CHECKERS, MONOLITHIC SILICON
Inactive for new design after 7 September 1995.
This specification is approved for use by all Depart- ments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic, silicon, TTL, parity generators/checkers. Two product assurance classes and a choice of case outlines and lead finishes are provided
for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535 and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type Circuit
01 8-bit odd/even parity generator/checker
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style
A |
GDFP5-F14 or CDFP6-F14 |
14 |
Flat pack |
B |
GDFP4-F14 |
14 Flat pack |
|
C |
GDIP1-T14 or CDIP2-T14 |
14 |
Dual-in-line |
D |
GDFP1-F14 or CDFP2-F14 |
14 |
Flat pack |
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business