INCH POUND
MIL-M-38510/15B
14 April 2005
SUPERSEDING MIL-M-38510/15A
27 July 1979
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, TTL, BISTABLE LATCHES, MONOLITHIC SILICON
Inactive for new design after 6 September 1996.
This specification is approved for use by all Depart- ments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic, silicon, TTL, 4-bit bistable latch microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type Circuit
01 4-bit latch, complementary outputs
02 4-bit latch
03 Dual 4-bit latch
04 4-bit latch, master reset
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style
A |
GDFP5-F14 or CDFP6-F14 |
14 |
Flat pack |
B |
GDFP4-F14 |
14 |
Flat pack |
C |
GDIP1-T14 or CDIP2-T14 |
14 |
Dual-in-line |
D |
GDFP1-F14 or CDFP2-F14 |
14 |
Flat pack |
E |
GDIP1-T16 or CDIP2-T16 |
16 |
Dual-in-line |
F |
GDFP2-F16 or CDFP3-F16 |
16 |
Flat-pack |
J |
GDIP1-T24 or CDIP2-T24 |
24 |
Dual-in-line |
K |
GDFP2-F24 or CDFP3-F24 |
24 |
Flat-pack |
L |
GDIP3-T24 or CDIP4-T24 |
24 |
Dual-in-line |
z |
GDFP7-F24 or CDFP8-F24 |
24 |
Flat-pack |
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business