INCH-POUND MIL-M-38510/140A
22 December 2004
SUPERSEDING MIL-M-38510/140
31 October 1986
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, MONOLITHIC AND HYBRID SILICON, MICROPROCESSOR COMPATIBLE, 12 BIT ANALOG-TO-DIGITAL CONVERTERS
Reactivated after 22 December 2004 and may be used for either new or existing design acquisitions.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and
MIL-PRF-38535 and MIL-PRF-38534.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic and hybrid, microprocessor compatible, 12-bit successive approximation analog-to-digital converters buffered outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part or identifying number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are internally compensated and are as follows:
Device type |
Input voltage range (all device types) |
Technology |
Bipolar zero drift |
Gain error drift (�AE / �T) |
|||
(pin programmable) |
|
(�BZ / �T) LSB limits |
ppm/°C limits |
||||
Min |
Max |
Min |
Max |
||||
01 |
0 V to +10 V unipolar |
Monolithic |
-1 |
+1 |
-12.5 |
+12.5 |
|
0 V to +20 V unipolar |
|||||||
-5 V to +5 V bipolar |
|||||||
-10 V to +10 V bipolar |
|||||||
02 |
Same as defined for device type 01 |
Monolithic |
-2 |
+2 |
-25 |
+25 |
|
03 |
" |
Hybrid 1/ |
-1 |
+1 |
-12.5 |
+12.5 |
|
04 |
" |
Hybrid 1/ |
-2 |
+2 |
-25 |
+25 |
|
05 |
" |
Monolithic |
-1 |
+1 |
-12.5 |
+12.5 |
|
06 |
" |
Monolithic |
-2 |
+2 |
-25 |
+25 |
|
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style x GDIP1-T28 or CDIP2-T28 28 Dual-in-line
1/ The 03 and 04 devices shall have to meet the hybrid requirements of MIL-PRF-38534.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed to linear@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business