MIL-M-38510-129 Microcircuits, Monolithic Silicon Interface, Dual, Peripheral DriversThis specification covers the detail requirements for bipolar, monolithic silicon, dual peripheral drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81

INCH-POUND MIL-M-38510/1298

06 December 2004

SUPERSEDING MIL-M-38510/129A

06 December 1985

MILITARY SPECIFICATION

MICROCIRCUITS, MONOLITHIC SILICON INTERFACE, DUAL PERIPHERAL DRIVERS

Reactivated after 06 December 2004 and may be used for either new or existing design acquisition.

This specification is approved for use by all Departments and Agencies of the Department of Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for bipolar, monolithic silicon, dual peripheral drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-

38535, (see 6.3)

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device types                                                                             Circuit

01                                       Dual NAND/AND gate and transistor (separate), high speed switching

02                                       Dual AND gate and transistor (connected), high speed switching

03                                       Dual NAND gate and transistor (connected), high speed switching

04                                       Dual OR gate and transistor (connected), high speed switching

05                                       Dual NOR gate and transistor (connected), high speed switching

06        High voltage dual NAND/AND gate and transistor (separate), medium speed switching

07        High voltage dual AND gate and transistor (connected), medium speed switching

08                                       High voltage dual NAND gate and transistor (connected), medium

speed switching

09        High voltage dual OR gate and transistor (connected), medium speed switching

10                                       High voltage dual NOR gate and transistor (connected), medium

speed switching

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outline.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter          Descriptive designator                  Terminals                    Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East 8road St., Columbus, OH 43218-3990, or email Linear@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                           FSC 5962