Microcircuits Electronic Mil-Specs - FSC 5962

A-A-55503 - Microcircuit, Digital, 8-Bit Nmos Microcontroller With 2K X 8 Eprom And 128K X 8 Ram

This CID covers the general requirements for all microcontroller with 2K x 8 EPROM and 128K x 8 RAM, digital microcircuit. Digital microcircuits covered by this CID are intended for commercial/industrial applications and shall not be used in military systems needing stringent environmental and electrical requirements.

A-A-51376 - Guide, Wire Strut (V Shape, House)

This commercial item description covers one size of wire strut guide of the House Design suitable for use during surgical procedures in the middle ear.

A-A-51385 - Connector, Cannula, Hemodialysis

A-A-51386 - Cannula, Hemodialysis

A-A-51390 - Wire, Electrode, Patient

This commercial item description covers a patient electrode wire suitable for use with push pin receiver cable for electrocardiograph monitoring equipment and electrode pads.

A-A-51397 - Tubing, Surgical Plastic, 3/16 Inch Inside Diameter

This commercial item description covers three types of 3/16 inch or 5 millimeter inside diameter plastic surgical tubing suitable for suction in surgical procedure or for oxygen or anesthetic gas delivery.

A-A-51398 - Bougie, Urethral, Otis

This commercial item description covers Otis design urethral bougies suitable for dilating the urethra.

A-A-51408 - Tube, Colon, Surgical (Disposable)

A-A-51409 - Tube, Drainage, Surgical, Thoracic

This commercial item description covers a series of sterile, radiopaque, plastic thoracic surgical drainage tubes for use following chest surgery.

A-A-51410 - Suture, Nonabsorbable, Surgical Polypropylene, Monofilament, Single Armed

A-A-51412 - Anoscope, Fansler, 6 Cm

A-A-51413 - Anoscope, Hirschman

This commercial item description covers medium-size and small-size Hirschman-design anoscopes.

A-A-51414 - Cannula, Brain, Haynes, 13 Gage

This commercial item description covers one size of brain cannulae of the Haynes design suitable for use in neurosurgical procedures.

A-A-51438 - Drainage Unit, Pleural Cavity

This Commercial Item Description describes underwater and gravity chest drainage units, pleural, which accompany most heart and lung operations, and are utilized for a variety of medical conditions shall be Type I, Type II or Type III as described herein.

A-A-51439 - Tubing, Surgical (Plastic)

This commercial item description covers plastic tubing suitable for use with surgical suction apparatus.

A-A-51445 - Kit, Disposable, Lensectomy

A-A-51446 - Tube, Drainage, Surgical (Penrose)

A-A-51452 - Support, Knee

A-A-51455 - Tube, Drainage, Surgical, Thoracic, Plastic, Radiopaque, Straight, Disposal, 28 Fr, 10S

This commercial item description covers one type of sterile, disposable, radiopaque, thoracic surgical drain tube and trocar suitable for closed intercostal drainage.

A-A-51463 - Suction Set, Tracheal

This commercial item description covers two sizes of disposable, sterile tracheobronchial suction sets.

A-A-51464 - Reservoir, Suction, Jackson-Pratt, Silicon

This commercial item description covers a sterile disposable suction reservoir for use with Jackson-Pratt style surgical drains.

A-A-51468 - Intravenous Injection Set, With Flexible Drip Chamber, Non-Vented, Adult, Without Needle, Disposable, 50'S

This commercial item description covers a single type of non-vented intravenous injection set used in administering parenteral solutions from glass containers with airways or flexible bags.

A-A-51471 - Mallet Nasal, Copper, Small

A-A-51474 - Bone, Plate, Broad, Orthopedic Implant, Self-Compressing Holes

This commercial item description covers broad bone plates with self-compressing holes suitable for surgical procedures of the femur or humerus.

A-A-51475 - Nail, Bone, Schneider, Double Point

This commercial item description covers bone nails, of the Schneider design, suitable for femoral fixation and intramedullary surgical procedures.

A-A-51476 - Otoscope (Bruening)

A-A-51482 - Wire Snare, No. 24 Stubs Wire Gage, Carbon Steel

A-A-51490 - Probe, General Operating (Mall)

This commercial item description covers a general operating prober of the Mall design suitable for surgical procedures.

A-A-51492 - Incision-Drainage Set

This commercial item description covers a incision and drainage set suitable for minor surgical procedures.

A-A-51494 - Electrode, Electrocardiograph

A-A-51496 - Recovery Pack, Blood Cell Collection

A-A-51507 - Tubes, Tracheal, Magill

This commercial item description covers sterile, plastic Magill type tracheal tubes.

A-A-51508 - Syringe, Irrigating, Bulb Type, 3 Oz., Disposable, 50S

This commercial item description covers a sterile, disposable, plastic syringe used to irrigate the eye, ear and ulcers.

A-A-51509 - Tube, Tracheal, Radiopaque (Murphy)

This Commercial Item Description covers disposable Murphy-type tracheal tubes commonly used in human patients in the practice of anesthesiology and in respiratory care.

A-A-51513 - Catheter And Connector, Suction, Tracheal

This commercial item description covers a various sized tracheal suction and catheters and connectors.

A-A-51514 - Syringe And Needle Hypodermic, Disposable, U-100 Insulin

This commercial item description covers disposable syringes with a permanently attached needle suitable for the administration of U-100 insulin.

A-A-51520 - Screw, Bone, Cancellous

This commercial item description covers cancellous bone screws suitable for scaphoid and routine large cancellous fragment procedures.

A-A-51528 - Support, Knee

This commercial item description covers two (2) sizes of a one-way stretch elastic, hinged knee support to provide stability to the muscles, tendons, and ligaments of the injured or diseased knee.

A-A-51531 - Hook, Bone, 7-1/4 Inch

This commercial item description covers a bone hook suitable for pulling and holding bone fragments in place during orthopedic surgery.

A-A-51532 - Pin, Bone (Kirschner)

This commercial item description covers bone pins of the Kirschner design, with bayonet points, for applying traction in the extension of fractures.

A-A-51533 - Screw, Bone (Woodruff Head)

This commercial item description covers head bone pins with standard points for use directly on thick cortices or with bone plate that accept conically-headed bone screws in the diaphyseal region of bones.

A-A-51534 - Screw, Bone (82 Deg. Countersunk Head)

This commercial item description covers 82 Degrees countersunk head bone pins with pilot points suitable for implanting bones.

A-A-51540 - Catheter, Irrigation, Colonoscope

A-A-51545 - Humidifier, Inhalation Therapy Apparatus

This commercial item description covers a single-patient-use bubble humidifier for use in the administration of inhalation therapy.

A-A-51546 - Drain, Closed Suction (Jackson-Pratt Style)

This commercial item description covers two sizes of Jackson-Pratt style drains for use with a hand-held aspirator-type reservoir in providing suction of closed wounds.

A-A-51552 - Airway, Pharyngeal (Guedel)

This Commercial Item Description covers two sizes of Guedel design disposable, plastic pharyngeal airways.

A-A-51581 - Resuscitator, Hand Operated

This commercial item description covers a handpowered, compressible bag-valve-mask resuscitator with an oxygen reservoir suitable for use by medical or paramedical personnel in emergency ventilation of humans.

A-A-51586 - Retractor, General, Senn

This commercial item description covers a retractor of the Senn-Kanavel design suitable for ear, nasal and general surgical procedures.

A-A-51595 - Catheter, Cardiovascular, Irrigation

A-A-51597 - Electrode, Electrocardiograph

This commercial item description covers a disposable pregelled electrocardiographic electrode suitable for cardiac monitoring.

A-A-51601 - Mask, Oronasal, Transparent

This Commercial Item Description covers an oronasal face mask with a one-way valve and head strap for mouth to mask resuscitation of a nonbreathing patient.

A-A-51602 - Canister Assembly, Suction, Surgical

This commercial item description covers a suction canister assembly for collecting fluids during surgery.

A-A-51603 - Resuscitator, Cardiopulmonary

This commercial item description covers a portable resuscitator suitable for emergency cardiopulmonary resuscitation in a variety of locations and during patient transport.

A-A-51605 - Adapter, Catheter-To-Luer Syringe, Tuohy

A-A-51612 - Suture, Absorbable, Surgical (Glycolide-Lactide Copolymer)

This commercial item description covers absorbable surgical sutures fabricated of glycolide-lactide copolymer and suitable for use in various surgical procedures.

A-A-51618 - Anoscope (Brinkerhoff)

A-A-51621 - Holder, Leg

A-A-51630 - Blood Sample, Collecting Set

A-A-51634 - Handle-Electrode, Electrosurgery

This commercial item description covers a disposable, pencil-type handle and electrode for use with an electrosurgical apparatus.

A-A-51636 - Syringe, Fluid Dispensing, 10 Ml (Pharmaceutical)

This commercial item description covers a spring loaded, 10 ml fluid dispensing syringe designed for dispensing of intravenous additives and unit dose fluids in the pharmacy.

A-A-51639 - Arch Supports

This commercial item description covers one type of lightweight orthotic arch support for patients experiencing discomfort and pain associated with stress to the anatomical structures of the foot caused by standing, walking, running and various athletic maneuvers.

A-A-51649 - Audiometer (Dual Channel)

This commercial item description covers a dual channel audiometer suitable for use in audiometric testing for air conduction, bone conduction and speech.

A-A-51654 - Tube, Tracheostomy, Disposable (Low Pressure Cuff, Shiley)

This commercial item description covers sterile, disposable, soft plastic, low pressure cuff tracheostomy tube, Shiley style, suitable for long term ventilation of tracheostomy patients who do not require high ventilation pressures.

A-A-51655 - Buttress, Suture (Polytetrafluoroethylene)

A-A-51656 - Electrosurgical Apparatus, (Portable)

This commercial item description covers a portable electrosurgical apparatus.

A-A-51671 - Introducer Set, Catheter, Percutaneous

A-A-51684 - Controller, Drop Rate, Intravenous Injection

This commercial item description covers a disposable controller, drop rate, intravenous injection, for use with 20 gage or larger hypodermic needles.

A-A-51690 - Mask, Oronsal (Plastic, Elongated)

This commercial item description covers a disposable, elongated oronasal oxygen mask.

A-A-51692 - Case, Needle And Blade

This commercial item description covers two sizes of sterile plastic cases suitable for the counting and disposal of suture needles and blades in a sterile field.

A-A-51694 - Stopcock, Arterial-Venous Pressure Monitoring (One-Way)

A-A-51695 - Retractor, Rectal (Hill-Ferguson)

This commercial item description covers a retractor of the Hill- Ferguson type, suitable for general surgical procedures.

A-A-51702 - Speculum, Septum (Cottle)

This commercial item description covers Cottle septum speculum for use in exposing the nasal canals.

A-A-51706 - Stethoscope, Es

MIL-M-38510/245 - Microcircuits, Digital, Cmos, 4096 Bit, Static Random Access Memory (Sram), Bulk Silicon And Silicon On Sapphire

This specification covers the detail requirements for bulk silicon and silicon on sapphire (SOS), static, 4096 bit, random access memory microcircuits. Two product assurance classes, four radiation hardness assurance levels, and a choice of case outlines and lead finishes are provided and are reflected in the part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4)

A-A-51595 - Catheter, Cardiovascular, Irrigation

A-A-51597 - Electrode, Electrocardiograph

This commercial item description covers a disposable pregelled electrocardiographic electrode suitable for cardiac monitoring.

A-A-51601 - Mask, Oronasal, Transparent

This Commercial Item Description covers an oronasal face mask with a one-way valve and head strap for mouth to mask resuscitation of a nonbreathing patient.

A-A-51602 - Canister Assembly, Suction, Surgical

This commercial item description covers a suction canister assembly for collecting fluids during surgery.

A-A-51603 - Resuscitator, Cardiopulmonary

This commercial item description covers a portable resuscitator suitable for emergency cardiopulmonary resuscitation in a variety of locations and during patient transport.

A-A-51605 - Adapter, Catheter-To-Luer Syringe, Tuohy

A-A-51612 - Suture, Absorbable, Surgical (Glycolide-Lactide Copolymer)

This commercial item description covers absorbable surgical sutures fabricated of glycolide-lactide copolymer and suitable for use in various surgical procedures.

A-A-51618 - Anoscope (Brinkerhoff)

A-A-51621 - Holder, Leg

A-A-51630 - Blood Sample, Collecting Set

A-A-51634 - Handle-Electrode, Electrosurgery

This commercial item description covers a disposable, pencil-type handle and electrode for use with an electrosurgical apparatus.

A-A-51636 - Syringe, Fluid Dispensing, 10 Ml (Pharmaceutical)

This commercial item description covers a spring loaded, 10 ml fluid dispensing syringe designed for dispensing of intravenous additives and unit dose fluids in the pharmacy.

A-A-51639 - Arch Supports

This commercial item description covers one type of lightweight orthotic arch support for patients experiencing discomfort and pain associated with stress to the anatomical structures of the foot caused by standing, walking, running and various athletic maneuvers.

A-A-51649 - Audiometer (Dual Channel)

This commercial item description covers a dual channel audiometer suitable for use in audiometric testing for air conduction, bone conduction and speech.

A-A-51654 - Tube, Tracheostomy, Disposable (Low Pressure Cuff, Shiley)

This commercial item description covers sterile, disposable, soft plastic, low pressure cuff tracheostomy tube, Shiley style, suitable for long term ventilation of tracheostomy patients who do not require high ventilation pressures.

A-A-51655 - Buttress, Suture (Polytetrafluoroethylene)

A-A-51656 - Electrosurgical Apparatus, (Portable)

This commercial item description covers a portable electrosurgical apparatus.

A-A-51671 - Introducer Set, Catheter, Percutaneous

A-A-51684 - Controller, Drop Rate, Intravenous Injection

This commercial item description covers a disposable controller, drop rate, intravenous injection, for use with 20 gage or larger hypodermic needles.

A-A-51690 - Mask, Oronsal (Plastic, Elongated)

This commercial item description covers a disposable, elongated oronasal oxygen mask.

A-A-51692 - Case, Needle And Blade

This commercial item description covers two sizes of sterile plastic cases suitable for the counting and disposal of suture needles and blades in a sterile field.

A-A-51694 - Stopcock, Arterial-Venous Pressure Monitoring (One-Way)

A-A-51695 - Retractor, Rectal (Hill-Ferguson)

This commercial item description covers a retractor of the Hill- Ferguson type, suitable for general surgical procedures.

A-A-51702 - Speculum, Septum (Cottle)

This commercial item description covers Cottle septum speculum for use in exposing the nasal canals.

A-A-51706 - Stethoscope, Es

MIL-M-38510/59 - Microcircuits, Digital, Cmos, Decoder, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits. Two product assurance classes and a choice of case outlines , lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-BUL-103 - List Of Standard Microcircuit Drawings (S/S By Mil-Hdbk-103)

MIL-HDBK-103 - List Of Standard Microcircuit Drawings

The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by MIL-HDBK-512, "Parts Management." The PMP will be the avenue for screening candidate parts for the SMDP by the DLA Land and Maritime Military Parts Control Advisory Group (MPCAG).

MIL-HDBK-1331 - Parameters To Be Controlled For The Specification Of Microcircuits, Handbook For

This handbook describes the parameters required as a minimum for the specification of microcircuits. Parameters, rather than circuits, are considered because circuits vary with the manufacturers involved. Further, circuit designs should be subject to change if improvement results as long as the affected designs are compatible and fully interchangeable. The specific objectives of this document are as follows: a. To provide the minimum parameters that should be specified to ensure adequate evaluation of circuit design and performance. b. To provide maximum commonality of parameters for purpose of test and measurement, within and between major classes of microcircuit types and to allow the recognition of interface problems between types of microcircuits. c. To provide standard abbreviations, definitions and symbols pertinent to the specification of microcircuits. d. To promote maximum interchangeability and compatibility between microcircuits types.

MIL-HDBK-175 - Microelectronic Device Data Handbook

This handbook is intended as a quick-reference document for use by design engineers, technicians, parts specialists, and by contractors.

MIL-HDBK-179 - Microcircuit Acquisition Handbook (S/S By Sd-18)

This handbook has been prepared as a guide to assist the various military departments and associated contractors in the selection of microcircuits for military equipments. It provides guidance on how the DOD and its contractors can cooperatively select devices which will result in the lowest total cost of ownership for the DOD. Device selection is to be based on cost-effective performance, designed-in high quality, and reliability for a given application.

MIL-HDBK-780 - Standard Microcircuit Drawings

This handbook provides guidance and information concerning standard microcircuit drawings (SMD's). System applications are subject to the approval of the applicable program office. This handbook is for guidance only and cannot be cited as a requirement.

MIL-M-38510 - Microcircuits, General Specification For

This specification establishes the general requirements for monolithic, multichip, and hybrid microcircuits and the quality and reliability assurance requirements which must be met in the acquisition of microcircuits.

MIL-M-38510/1 - Microcircuits, Digital, Ttl, Nand Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/10 - Microcircuits, Digital, Bipolar, Ttl, Decoders Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, microcircuit decoders. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/101 - Microcircuits, Linear, Operational Amplifier, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/102 - Microcircuits, Linear, Voltage Regulator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, voltage regulator. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/103 - Microcircuits, Linear, Voltage Comparators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, voltage comparators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/104 - Microcircuits, Linear, Line Drivers And Receivers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon line drivers and receivers for use as voltage comparators and in balanced or unbalanced differential transmission systems which may include party-line transmission systems. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/105 - Microcircuits, Linear, Cmos, High Level Analog Switch With Driver, Monolithic Silicon

This specification covers the detail requirements for silicon, CMOS monolithic, analog switches. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.4).

MIL-M-38510/106 - Microcircuits, Linear, Voltage Follower Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, voltage follower operational amplifier microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/107 - Microcircuits, Linear, Positive, Voltage Regulators, Monolithic Silicon

This specification covers the detail requirements for fixed output, monolithic silicon, positive voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/108 - Microcircuits, Linear, Transistor Arrays, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon transistor arrays. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/109 - Microcircuits, Linear, Precision Timers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, precision timers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/11 - Microcircuits, Digital, Ttl, Arithmetic Logic Units/Function Generators, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, arithmetic logic units/ function generators. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/110 - Microcircuits, Linear, Quad Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, quad operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/111 - Microcircuits, Analog Switch With Driver, Monolithic And Multi-Chip Silicon

This specification covers the detail requirements for silicon, break-before-make, monolithic and multi-chip analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/112 - Microcircuits, Linear, Voltage Comparators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, voltage comparators. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/113 - Microcircuits, Linear, 8 Bit, Digital-To-Analog Converters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, 8 bit, digital-to-analog converters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/114 - Microcircuits, Linear, Bi-Fet Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, BI-FET operational amplifier microcircuit. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/115 - Microcircuits, Linear, Negative, Voltage Regulators, Monolithic Silicon

This specification covers the detail requirements for fixed output, monolithic silicon, negative, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/116 - Microcircuits, Linear, Cmos Analog Switch With Driver, Monolithic Silicon

This specification covers the detail requirements for silicon, CMOS, monolithic, analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/117 - Microcircuits, Linear, Adjustable, Positive, Voltage Regulators, Monolithic Silicon

This specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, positive, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/118 - Microcircuits, Linear, Adjustable, Negative, Voltage Regulators, Monolithic Silicon

This specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, negative, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/119 - Microcircuits, Linear, Low Power, Low Noise, Bi-Fet Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, BI-FET operational amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/12 - Microcircuits, Digital, Bipolar, Ttl, Monostable Multivibrators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, TTL, monostable multivibrators microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/120 - Microcircuits, Linear, Hybrid, 12 Bit Analog-To-Digital Converters

This specification covers the detail requirements for hybrid 12-bit successive approximation A/D converters.

MIL-M-38510/121 - Microcircuits, Linear Monolithic And Multichip, Silicon 12 Bit Digital-To-Analog Converters

This specification covers the detail requirements for monolithic silicon, bipolar, interface, memory core drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/122 - Microcircuits, Linear, High Slew Rate Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, operational amplifier microcircuit. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/123 - Microcircuits, Linear, Cmos, Negative Logic, Analog Switch, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS negative logic analog switches. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/124 - Microcircuits, Linear, Precision Voltage References, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, precision voltage references. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/125 - Microcircuits, Linear, Sample And Hold Circuits, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, sample and hold circuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4)

MIL-M-38510/126 - Microcircuits, Linear, Regulating, Pulse Width Modulator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, pulse width modulator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/127 - Microcircuits, Linear, Cmos Multiplying D/A Converters, Monolithic Silicon

This specification covers the detail requirement for monolithic silicon, CMOS multiplying D/A converters.

MIL-M-38510/128 - Microcircuits, Linear, Programmable Voltage References, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, programmable voltage references. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/129 - Microcircuits, Monolithic Silicon Interface, Dual, Peripheral Drivers

This specification covers the detail requirements for bipolar, monolithic silicon, dual peripheral drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/13 - Microcircuits, Digital, Bipolar, Ttl, Counters Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, binary and decade counters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/130 - Microcircuits, Monolithic Silicon, Bipolar, Interface, Memory Core Drivers

This specification covers the detail requirements for monolithic silicon, bipolar, interface, memory core drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/-131 - Microcircuits, Linear, Low Noise Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low noise operational amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535.

MIL-M-38510/133 - Microcircuits, Linear, 10-Bit Digital-To-Analog Converter, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, 10-bit binary digital-to-analog converters containing deposited thin film resistor networks. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/134 - Microcircuits, Linear, Analog-To-Digital Converters With 3-State Buffered 10 Bit Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic 10-bit successive approximation A/D converters with 3-state buffered outputs.

MIL-M-38510/135 - Microcircuits, Linear, Low Offset Operational Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low offset operational amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.4).

MIL-M-38510/136 - Microcircuits, Linear, Precision Voltage References, Hybrid Silicon

This specification covers the detail requirements for hybrid voltage references.

MIL-M-38510/137 - Microcircuits, Linear, Voltage Output 12-Bit Digital-To-Analog Converters, Hybrid And Monolithic Silicon

This specification covers the detail requirements for range-programmable, voltage output, digital-to-analog converters. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/138 - Microcircuits, Linear, Voltage-To-Frequency Converters, Monolithic Silicon

This specification covers the detail requirements for monolithic voltage-to-frequency converters.

MIL-M-38510/139 - Microcircuits, Linear, Internally Trimmed Analog Multiplier, Hybrid And Monolithic Silicon

This specification covers the detail requirements for monolithic and hybrid silicon, internally trimmed analog multipliers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/14 - Microcircuits, Digital, Ttl, Data Selectors/Multiplexers, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, data selectors/multiplexers, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/140 - Microcircuits, Linear, Monolithic And Hybrid Silicon, Microprocessor Compatible, 12 Bit Analog-To-Digital Converters

This specification covers the detail requirements for monolithic and hybrid, microprocessor compatible, 12-bit successive approximation analog-to-digital converters buffered outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/141 - Microcircuits, Linear, Darlington Transistor Array, Seven And Eight Gate, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, seven and eight gate, Darlington transistor array microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/142 - Microcircuits, Linear, High Speed Track And Hold Amplifier, Hybrid, Silicon

This specification covers the detail requirements for high speed track and hold amplifiers.

MIL-M-38510/143 - Microcircuits, Linear, Instrumentation Amplifiers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, instrumentation amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/144 - Microcircuits, Linear, Microprocessor Compatible 8-Bit Digital-To-Analog Converter, Monolithic Silicon

This specification covers the detail requirements for monolithic, range-programmable, output voltage digital-to-analog converter. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/148 - Microcircuits, Linear, Adjustable, Precision Voltage Reference, Shunt Regulator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, precision voltage reference. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/15 - Microcircuits, Digital, Ttl, Bistable Latches, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, 4-bit bistable latch microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/150 - Microcircuits, Digital, Bipolar, Ttl, Magnitude Comparators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Low Power Scottky TTL, magnitude comparator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/151 - Microcircuits, Digital, Bipolar, Ttl, Schmitt-Trigger Nand Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon line, TTL, Schmitt-Trigger, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/152 - Microcircuits, Digital, Ttl, Data Decoders/Demultiplexers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, data decoders/demultiplexers, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/153 - Microcircuits, Digital, Ttl, Quadruple Bus Buffer Gates With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, quadruple bus buffer gates with three-state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/155 - Microcircuits, Digital, Ttl, High Speed, And Gates Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, high speed positive AND logic gating microcircuits. One product assurance class and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/156 - Microcircuits, Digital, Ttl, Data Encoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, data encoder, microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4)

MIL-M-38510/157 - Microcircuits, Digital, Ttl, Multiple Port Registers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, multiple port registers.

MIL-M-38510/158 - Microcircuits, Digital, Ttl, Decoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, decoder microcircuits.

MIL-M-38510/159 - Microcircuits, Digital, Ttl, Shift Registers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, shift register microcircuits.

MIL-M-38510/16 - Microcircuits, Digital, Ttl, And Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, positive AND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/160 - Microcircuits, Digital, Ttl, Addressable Latches, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, addressable latch microcircuits.

MIL-M-38510/161 - Microcircuits, Digital, Bipolar, Ttl, Common Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, positive OR logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/162 - Microcircuits, Digital, Ttl, Nor Buffers. Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, NOR buffer microcircuits.

MIL-M-38510/163 - Microcircuits, Digital, Bipolar, Ttl, Hex Bus Drivers With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, hex bus driver (3-state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/17 - Microcircuits, Digital, Ttl, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, bistable logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/170 - Microcircuits, Digital, Cmos, And Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/171 - Microcircuits, Digital, Cmos, Or Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/172 - Microcircuits, Digital, Cmos, And-Or-Invert, Exclusive-Or, Exclusive-Nor Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/173 - Microcircuits, Digital, Cmos, Decoders, Encoder, And Decoders/Demultiplexers Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/174 - Microcircuits, Digital, CMOS, Inverter, NAND Buffer Driver, Strobed Hex Inverter/Buffer, Voltage Level Shifter, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/175 - Microcircuits, Digital, Cmos, Positive Logic, Flip-Flops And Monostable Multivibrator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/176 - Microcircuits, Digital, Cmos, Latches, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/177 - Microcircuit, Digital, Cmos, Schmitt Triggers, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/178 - Microcircuit, Digital, Cmos Multiplexers Demultiplexers Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic, silicon, CMOS logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/18 - Microcircuits, Digital, Ttl, Register File, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, bistable logic gating microcircuits. One product assurance class and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/19 - Microcircuits, Digital Ttl, Parity Generators/Checkers, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, parity generators/checkers. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/190 - Microcircuits, Linear, Cmos/Analog Multiplexers/Demultiplexers With Overvoltage Protection, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS/Analog logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/2 - Microcircuits, Digital, Ttl, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, bistable logic microcircuits. Three product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/20 - Microcircuits, Digital, Ttl, Low Power, Nand Gates ,Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, low power positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/201 - Microcircuits, Digital, 512-Bit, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, PROM microcircuits which employ thin film nichrome (NiCr) resistors as the fusible link or programming element. One product assurance class and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/202 - Microcircuits, Digital, 1024 Bit Bipolar Programmable Read-Only Memory (P-Rom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, programmable read-only memory (P-ROM) microcircuits which employ the Avalanche-Induced Migration (AIM) bit programming system and for fixed-mask read-only memory (ROM) microcircuits.

MIL-M-38510/203 - Microcircuits, Digital, 1024 Bit Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, programmable read-only memory (PROM) microcircuits which employ thin film nichrome (NiCr) resistors, tungsten (W), titanium tungsten (TiW), or zapped vertical emitter (ZVE) as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/204 - Microcircuit, Digital, 2048-Bit, Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, PROM microcircuits which employ thin film nichrome (NiCr) resistors, tungsten (W), titanium tungsten (TiW), or zapped vertical emitter (ZVE) as the fusible link or programming element. Two product assurance class and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/206 - Microcircuit, Digital, 4096 Bit Schottky, Bipolar, Programmable Read-Only Memory (Prom)

This specification covers the detail requirements for monolithic silicon, programmable read-only memory (PROM) microcircuits which employ thin film nichrome (NiCr) resistors, tungsten (W) or titanium tungsten (TiW) as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. A special test requirement is included in this specification to screen against devices which may contain excess moisture in the package materials or internal atmosphere ( see freeze-out test of 4.2d). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/207 - Microcircuit, Digital, 256-Bit, Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, PROM microcircuits which employ thin film nichrome (NiCr) resistors, tungsten (W), titanium tungsten (TiW), or zapped vertical emitter (ZVE) as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead material and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/208 - Microcircuit, Digital, 4096-Bit Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, programmable read-only memory (PROM) microcircuits which employ thin film nichrome (NiCr) resistors, titanium-tungsten (TiW), or zapped vertical emitter (ZVE) as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/209 - Microcircuit, Digital, 8192-Bit, Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, PROM microcircuits which employ thin film nichrome (NiCr) resistors, zapped vertical emitter, tungsten (W), titanium tungsten (TiW), or platinum silicide as the fusible link or programming element. Two product assurance class and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/21 - Microcircuits, Digital, Bipolar, Ttl, Low Power, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, low power, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/210 - Microcircuit, Digital, 16,384 Bit Schottky, Bipolar, Programmable Read-Only Memory (Prom) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, programmable read-only memory (PROM) microcircuits which employ thin film nichrome (NiCr) resistors, platinum-silicide, tungsten (W), titanium-tungsten (TiW) or zapped vertical emitter as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/211 - Microcircuits, Digital, 32,768 Bit Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, PROM microcircuits which employ thin film nichrome resistors (NiCr), titanium-tungsten (TiW), or zapped vertical emitter as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the part number. A special test requirement is included in this specification to screen against devices which may contain moisture in the package materials or internal atmosphere (see freeze-out test of 4.2d).

MIL-M-38510/212 - Microcircuits, Digital, 65,536 Bit Schottky, Bipolar, Programmable Read-Only Memory (Prom), Monolithic Silicon

This specification covers the detail requirements of monolithic silicon, PROM microcircuits which employ thin film nichrome resistors (NiCr), titanium tungsten (TiW), polycrystalline silicon (polysilicon), platinum silicide, zapped vertical diode, or zapped vertical emitter as the fusible link or programming element.

MIL-M-38510/219 - Microcircuits, Digital, 4096 Bit, Cmos, Ultraviolet Erasable, Programmable Read-Only Memory (Eprom), Monolithic Silicon

MIL-M-38510/22 - Microcircuits, Digital, Bipolar, High-Speed Ttl, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed TTL, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/220 - Microcircuits, Digital, 8192 Bit, Mos, Ultraviolet Erasable Programmable Read-Only Memory (Eprom) Monolithic Silicon

MIL-M-38510/221 - Microcircuits, Digital, 16,384 Bit Mos, Ultraviolet Erasable Programmable Read-Only Memory (Eprom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, N-channel MOS erasable programmable read-only memory microcircuits which employ the ultraviolet light erasing technique.

MIL-M-38510/222 - Microcircuit, Digital, 32,768 Bit Mos, Ultraviolet Erasable Programmable Read-Only Memory (Eprom) Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, N-channel MOS erasable programmable read-only memory microcircuits which employ the ultraviolet light erasing technique.

MIL-M-38510/224 - Microcircuits, Memory, Digital, Mos, 32K X 8, Ultraviolet Erasable Programmable Read-Only Memory (Eprom) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon N-channel MOS erasable requirements read-only memory microcircuits which employ the ultraviolet light erasing technique.

MIL-M-38510/226 - Microcircuits, Digital, Nmos 16,384 Bit, Electrically Erasable Programmable Read Only Memory (Eeprom) Monolithic Silicon

MIL-M-38510/227 - Microcircuits, Digital, Nmos, 16,384 Bit, Electrically Erasable, Programmable Read-Only Memory (Eeprom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, N-channel MOS, 2,048 words/8 bit, 5.0 volt electrically erasable programmable read-only memory microcircuits.

MIL-M-38510/228 - Microcircuits, Digital, Nmos 8K X 8 Bit, Electrically Erasable, Programmable Read-Only Memory (Eeprom) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, N-channel MOS, 8192 words/8 bit, 5.0 volt, electrically erasable programmable read-only memory microcircuits.

MIL-M-38510/23 - Microcircuits, Digital, Ttl, High Speed, Nand Gates Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, high speed, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/230 - Microcircuit, Digital, Bipolar 256 Bit Random Access Memory (Ram) Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, bipolar static 256-bit random access memories.

MIL-M-38510/231 - Microcircuits, Digital, Schottky Ttl, 1024 Bit Random Access Memory (Ram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, static, 1024 bit random access memory microcircuits. Two product assurance classes and a choice of case outlines/lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/232 - Microcircuits, Digital, Schottky Ttl, 576 Bit Random Access Memory (Ram), Monolithic Silicon

MIL-M-38510/233 - Microcircuit, Digital, Ttl, 4096 Bit Static Random Access Memory (Scram) Monolithic Silicon

MIL-M-38510/235 - Microcircuit, Digital, Mos, 4096 Bit Random Access Memory (Ram), Monolithic Silicon

MIL-M-38510/236 - Microcircuits, Digital, Mos, 4096 Bit Random Access Memory (Ram), Monolithic Silicon

MIL-M-38510/237 - Microcircuit, Digital, Mos, 4096 Bit Static Random Access Memory (Ram) Monolithic Silicon

MIL-M-38510/238 - Microcircuits, Digital, Mos, 4096 Bit Static Random Access Memory (Ram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, N-channel static MOS, 4096 bit random access memories. Two product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/239 - Microcircuits, Digital, Cmos 1024 Bit Random Access Memory (Ram), Monolithic Silicon

MIL-M-38510/24 - Microcircuits, Digital, Ttl, Nand Buffers, High Speed, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, high speed positive NAND buffer microcircuits. One product assurance class and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/240 - Microcircuits, Memory, Digital, Nmos, 16, 384 Bit Dynamic Random Access Memory (Dram), Monolithic Silicon

MIL-M-38510/244 - Microcircuits, Digital, Nmos, 65,536 Bit, Dynamic Random Access Memory (Dram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, N-channel, dynamic, NMOS, 65, 536/1-bit, random access memory microcircuits utilizing a 128 cycle refresh architecture and having pin number 1 as a no-connect.

e a hand-operated resuscitator, a foot-operated aspirator and a carrying case.

MIL-M-38510/245 - Microcircuits, Digital, Cmos, 4096 Bit, Static Random Access Memory (Sram), Bulk Silicon And Silicon On Sapphire

This specification covers the detail requirements for bulk silicon and silicon on sapphire (SOS), static, 4096 bit, random access memory microcircuits. Two product assurance classes, four radiation hardness assurance levels, and a choice of case outlines and lead finishes are provided and are reflected in the part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4)

MIL-M-38510/246 - Microcircuits, Memory, Digital, Nmos, 246,144-Bit Dynamic Random Access Memory (Dram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, NMOS, 262,144/1-bit, dynamic random access memory.

MIL-M-38510/25 - Microcircuits, Digital, Bipolar, Ttl, Low Power, Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, binary and decade counters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/250 - Microcircuits, Digital, Cmos, 512 X 9 Bit, First In - First Out Dual Port Memory (Fifo), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, first in - first out dual port memory microcircuits. One product assurance class and a choice of case outlines and lead finishes are provided and are reflected in the complete part - number.

MIL-M-38510/26 - Microcircuits, Digital, Ttl, Low Power, Exclusive-Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, low power, quadruple, 2- input exclusive-OR gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/265 - Microcircuits, Memory, Digital, Cmos 524,288 Bit, Electrically Erasable, Programmable Read-Only Memory (Eeprom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, 64K words x 8 bit, electrically clearable, writable read-only memory microcircuits.

MIL-M-38510/27 - Microcircuit, Digital, Ttl, Low Power, Multiple Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, low-power, positive NOR logic gating microcircuits. Two product assurance classes and a choice of case outline and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of Mil-M-38510 have been superseded by Mil-PRF-38535, (see 6.4)

MIL-M-38510/28 - Microcircuits, Digital, Ttl, Low Power Shift Registers, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, low power shift register, microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/289 - Microcircuits, Digital, Cmos 4096 Bit Static Random Access Memory (Ram) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS static, 4096-bit random access memories. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/29 - Microcircuits, Digital, Ttl, Low Power Decoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, low power microcircuits decoders.

MIL-M-38510/291 - Microcircuits, Digital, Cmos 16,384 Bit Static Random Access Memory (Ram) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, 16,384 bit static random access memory microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assured (RHA) products are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/292 - Microcircuits, Digital, Cmos, 65,536-Bit Static Random Access Memory (Sram) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, 65,536-bit, static random access memory microcircuits (including those with a power down data retentation feature).

MIL-M-38510/3 - Microcircuits, Digital, Bipolar, Ttl, Nand Buffers Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, positive NAND buffer microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/30 - Microcircuits, Digital, Dtl, Nand Gates Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, DTL, positive logic NAND gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/300 - Microcircuits, Digital, Bipolar, Low-Power Schottky, Ttl,And Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low power, Schottky, TTL, positive NAND logic gate microcircuits.

MIL-M-38510/301 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Flip-Flops, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, flip-flops, bistable logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/302 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Buffers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive buffer microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/303 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive NOR logic gating microcircuits.

MIL-M-38510/304 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, And-Or-Invert Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive AND-OR-INVERT logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/305 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, OR gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/306 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Shift Registers, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, low power, shift register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/307 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Decoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, decoder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/308 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Arithmetic Logic Units/Function Generators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, arithmetic logic units/function generators. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/309 - Microcircuits, Digital, Bipolar, Low Power Schotty Ttl, Data Selector/Multiplexer, With Three-State Outputs, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low power Schottky TTL, data selector/multiplexer (three-state) logic microcircuits.

MIL-M-38510/31 - Microcircuits, Digital, Dtl, Nand Buffer/Extender, Monolithic Silicon

MIL-M-38510/310 - Microcircuits, Digital, Bipolar Low-Power Schottly Ttl, And Gates Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, positive AND logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/311 - Microcircuits, Digital, Bipolar, Low Power Schottky Ttl, Magnitude Comparators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, magnitude comparator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/312 - Microcircuits, Digital, Low-Power Schottky Ttl, 4-Bit Binary Full Adders With Fast Carry, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, 4-bit binary full adders with fast carry. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/313 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl, Schmitt Trigger Positive Nand Gates And Inverters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, Schmitt trigger positive NAND gate and inverter microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/314 - Microcircuits, Digital, Low-Power Schottky, Ttl, Monostable Multivibrators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, monostable multivibrator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/315 - Microcircuits, Digital, Low-Power Schottky Ttl, Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low power Schottky TTL, binary and decade counters. Two product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/316 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Cascadable Latches,Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, latches. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/318 - Microcircuit, Digital, Low Power Schottky Ttl, Binary Multiplier, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, binary multiplier, logic microcircuits.

MIL-M-38510/319 - Microcircuits, Digital, Low-Power Schottky Ttl, 4 By 4 Register File, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, low-power, 4 by 4 register file microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/32 - Microcircuits, Digital, Dtl, Monostable Multivibrator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, DTL, logic microcircuits.

MIL-M-38510/320 - Microcircuits, Digital, Bipolar Low-Power Schottky Ttl. Counters, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, binary and decade counters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M- 38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/321 - Microcircuits, Digital, Low-Power Schottky Ttl, Buffers/Drivers, Open Collector Output, High Voltage, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, buffers/drivers microcircuits with open collector high voltage outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/322 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Hex Bus Drivers With 3 State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, hex bus driver (3 state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/323 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Quadruple Bus Buffer Gates With Three State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, quadruple bus buffer gates with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/324 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Octal Buffer Gates With Three State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, octal bus buffer gates with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/325 - Microcircuits, Digital, Bipolar, Low-Power, Schottky Ttl, Flip-Flops, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, low-power Schottky TTL, flip-flops, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/326 - Microcircuits, Digital, Low-Power Schottky Ttl, Demultiplexers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, demultiplexer microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/327 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, binary and decade counters microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/328 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Bus Transceivers With Three State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, bus transceivers with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/329 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Parity Checker, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, parity checker logic microcircuit. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/33 - Microcircuits, Digital, Dtl, Flip Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, DTL, logic microcircuits.

MIL-M-38510/330 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Nand Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive NAND logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/331 - Microcircuits, Digital, Bipolar, Low-Power Schottky Ttl, Flip-Flops, Cascadable, Monolithic Silicon

This specification covers the requirements for monolithic silicon, low-power Schottky TTL, bistable logic microcircuits.

MIL-M-38510/332 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Octal Buffers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive octal buffer (3-state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/333 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive NOR logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/334 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, And-Or-Invert Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive AND-OR-INVERT logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/335 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Quadruple, 2 Input Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, quadruple, 2 input positive OR logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/336 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Shift Registers, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, shift register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/337 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Decoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, decoder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/338 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Arithmetic Logic Units,Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, arithmetic logic units. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/339 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Data Selectors/Multiplexers With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, data selectors and multiplexers (three-state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/340 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, And Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, positive AND logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M- 38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/341 - Microcircuits, Digital, Bipolar, Advanced, Schottky Ttl, Flip-Flops, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, flip flop microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/342 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, 4-Bit Binary Full Adders With Fast Carry, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, 4-bit binary full adder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/343 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Binary Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, binary counter microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided or each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/344 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Decade Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, decade counter microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/345 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Exclusive Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, exclusive OR gates microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/346 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Transparent And Octal D Type Latches, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, octal transparent and octal D type latches (three state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/347 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, 8-Bit Identity Comparator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, 8-bit identity comparator, logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/348 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Bus Transceivers With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, bus transceivers, with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/349 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Parity Checker, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, parity checker microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/35 - Microcircuits, Digital, Clock Drivers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon bipolar drivers for MOS clocks. One product assurance class and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/350 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Quad 2-Port Registers, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, quad 2-port register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/351 - Microcircuits, Digital, Bipolar, Advanced Schottky Ttl, Hex Bus Drivers With 3-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, hex bus driver (3-state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/352 - Microcircuits, Digital, Bipolar Advanced Schottky Ttl, Nand Buffers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, NAND buffers. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/360 - Microcircuits, Digital, Bipolar, Low Power Schottky Ttl, Priority Encoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low power Schottky TTL, priority encoder, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/361 - Microcircuits, Digital, Bipolar, Low Power Schottky Ttl, Registers, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL, register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/370 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Nand Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, positive NAND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/371 - Microcircuits, Digital, Bipolar, Advanced, Low-Power Schottky Ttl, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced, low-power Schottky TTL, flip flops, bistable logic microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/372 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Flip-Flops Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, flip-flops, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/373 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, positive NOR logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/374 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, And Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, positive AND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/375 - Microcircuits, Digital, Bipolar, Advanced Low Power-Schottky Ttl, Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, positive OR logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/376 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Shift Registers, Cascadable, Monolithic Silicon

This specification covers the requirements for monolithic silicon Advanced Low Power Schottky TTL, shift register microcircuits.

MIL-M-38510/377 - Microcircuits, Digital, Bipolar, Low Power Schottky Ttl, Decoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, low power Schottky TTL, decoder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/379 - Microcircuits, Digital, Advanced Low Power Schottky Ttl, Universal Multiplexer With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advance low power Schottky TTL, universal multiplexer (three-state) logic microcircuits. Two product assurance classes and a choice of case outlines/lead finishes are provided for each type and are reflected in the complete part number.

MIL-M-38510/380 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Binary Counters, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, binary counters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/381 - Microcircuits, Digital, Bipolar, Advanced Low-Power Schottky, Ttl, Cascadable, Decade Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, decade counters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.

MIL-M-38510/382 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, D-Type Latches, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, D-type latches, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/383 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, Octal Buffer Gates With Three State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, advanced low power Schottky, octal bus buffer gates with three state outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/384 - Microcircuits, Digital, Bipolar, Advanced Low Power Schottky Ttl, And, Or, Nand And Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low power Schottky TTL, positive AND, OR, NAND, and NOR logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/385 - Microcircuits, Digital, Bipolar, Advanced Low-Power Schottky Ttl, Bus Transceivers With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced low-power Schottky TTL, bus transceivers with three-state outputs.

MIL-M-38510/4 - Microcircuits, Digital Ttl, Multiple Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, positive NOR logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/40 - Microcircuits, Digital, Ttl, High Speed, And-Or-Invert Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, HIGH-SPEED, and-or-invert logic gating microcircuits. One product assurance class and a choice and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number.

MIL-M-38510/400 - Microcircuits, Digital, N-Channel, Silicon-Gate Monolithic 8 Bit Microprocessor (Fixed Instruction)

This specification covers the detail requirements for monolithic N-channel, silicon gate microprocessor.

MIL-M-38510/401 - Microcircuits, Digital, N-Channel, Silicon-Gate, Monolithic Peripheral Interface Adapter

This specification covers the detail requirements for monolithic N-channel, silicon gate peripheral interface adapter.

MIL-M-38510/402 - Microcircuits, Digital, Mos, 1024-Bit Static Random Access Memory (Ram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, N-channel static MOS, 1024-bit RAM microcircuits.

MIL-M-38510/403 - Microcircuits, Digital, Nmos, 2048-Word X 8-Bit Static Read Only Memory (Rom), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, silicon gate, NMOS, ROM microcircuits.

MIL-M-38510/41 - Microcircuits, Digital, Ttl, Low-Power, And-Or-Invert Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, low-power, AND-OR-INVERT logic gating microcircuits.

MIL-M-38510/42 - Microcircuits, Digital, Ttl, Low Power, Monostable Multivibrators, Monolithic Silicon

MIL-M-38510/420 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 8 Bit Microprocessor (Fixed Instruction)

This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor.

MIL-M-38510/421 - Microcircuits, Digital, Schottky Tll, Input/Output Port With Three-State Output, Monolithic Silicon

This specification covers the detail requirements for a monolithic silicon, Schottky TTL, input/output port with three-state output microcircuits.

MIL-M-38510/422 - Microcircuits, Digital, Schottky Ttl, Clock Generator And Driver, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky, TTL, clock generator/driver microcircuits.

MIL-M-38510/423 - Microcircuits, Digital, Schottky Ttl, System Controller And Bus Driver, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL system controller/bus driver microcircuits.

MIL-M-38510/43 - Microcircuits, Digital, Ttl, Low Power, Priority Encoders, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon TTL, low power, priority encoders.

MIL-M-38510/44 - Microcircuits, Digital, Ttl, Low Power, Comparators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon TTL, low power comparator microcircuits.

MIL-M-38510/440 - Microcircuits, Digital, Four Bit Microprocessor Slice Monolithic Silicon

This specification covers the detail requirements for a monolithic, silicon, TTL compatible four-bit microprocessor slice.

MIL-M-38510/441 - Microcircuits, Digital, Low Power Schottky Ttl, Bus Transceiver, Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL bus transceiver microcircuits.

MIL-M-38510/442 - Microcircuits, Digital, Schottky, Ttl, D-Type Register, With Three-State Output, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, D-Type Register with three-state output microcircuits.

MIL-M-38510/45 - Microcircuits, Digital, Ttl, Low Power, Bistable Latches, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, low power, bistable latch microcircuits.

MIL-M-38510/46 - Microcircuits, Digital, Ttl, Low Power, Data Selectors/Multiplexers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, logic microcircuits.

MIL-M-38510/460 - Microcircuits, Digital, Integrated Injection Logic (I2L), Parallel 16 Bit Microprocessor, Monolithic Silicon

This specification covers the detail requirments for a monolithic silicon, integrated injection logic (I2L), parallel 16-bit microprocessor.

MIL-M-38510/465 - Microcircuits, Digital, Integrated Injection Logic (I2L), Parallel 16- Bit Microprocessor, Monolithic Silicon

This specification covers the detail requirements for a monolithic silicon, integrated injection logic (I2L), parallel 16-bit microprocessor.

MIL-M-38510/470 - Microcircuits, Digital, Cmos Monolithic 8-Bit Microprocessor (Fixed Instructions)

This specification covers the detail requirements for a monolithic CMOS silicon gate microprocessor.

MIL-M-38510/471 - Microcircuits, Digital, Cmos/Sos 1024 Bit Random Access Memory (Ram) Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon on sapphire, static, silicon gate CMOS 1024 bit random access memory microcircuits.

MIL-M-38510/472 - Microcircuit, Digital, Cmos, 512 Word X 8-Bit Static Read Only Memory (Rom) Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, silicon gate CMOS microcircuit.

MIL-M-38510/473 - Microcircuits, Digital, Cmos, Monolithic 8-Bit Input/Output Port

This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.

MIL-M-38510/474 - Microcircuit, Digital, Cmos, Monolithic N-Bit One Of Eight Decoder

This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.

MIL-M-38510/476 - Microcircuit, Digital, Cmos 4-Bit Bus Buffer/Separator, Monolithic Silicon

This specification covers the detail requirements for a monolithic silicon, silicon gate CMOS microcircuit.

MIL-M-38510/480 - Microcircuit, Digital, N-Channel, Silicon Gate, 8-Bit Microprocessor, Monolithic Silicon

This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor.

MIL-M-38510/481 - Microcircuit, Digital, N-Channel, Silicon Gate Monolithic Dual Serial Input/Output Controller

This specification covers the detail requirement for a monolithic N-channel, silicon gate dual serial input/output controller.

MIL-M-38510/482 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic Direct Memory Access Controller

This specification covers the detail requirements for a monolithic N-channel, silicon gate direct memory access controller.

MIL-M-38510/483 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic Counter/Timer Unit

This specification covers the detail requirements for a monolithic, N-channel, silicon gate counter/timer unit.

MIL-M-38510/484 - Microcircuits, Digital, N-Channel, Silicon Gate, Monolithic, Parallel Input/Output Controller

This specification covers the detail requirements for a monolithic N-channel, silicon gate, parallel input/output controller.

MIL-M-38510/490 - Microcircuits, Digital, N-Channel, Silicon Gate, Monolithic, 8-Bit Microcomputer

This specification covers the detail requirements for a monolithic N-channel, silicon gate microcomputer.

MIL-M-38510/5 - Microcircuits, Digital, Ttl, And-Or-Invert Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, AND-OR-INVERT logic gating microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/50 - Microcircuits, Digital, Cmos, Nand Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/500 - Microcircuits, Digital Ttl, Multiplier Accumulators/Multipliers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, multiplier accumulators and multiplier circuits. Two product assurance classes are reflected in the complete part number.

MIL-M-38510/502 - Microcircuits, Digital, Bipolar Field Programmable Logic Array (Fpla) 16 X 48 X 8, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, field programmable logic array (FPLA) microcircuits which employ thin film nichrome resistors (WICr) as the fusible link or programming element. Three product assurance classes and a choice of case outline/lead material and finish are provided for each type and are reflected in the complete part number.

MIL-M-38510/503 - Microcircuits, Digital, Bipolar, Programmable Logic, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, programmable array logic microcircuits which employ titanium-tungsten resistors as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/504 - Microcircuits, Digital, Bipolar Programmable Logic, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten (TiW) resistors as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead materials and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/505 - Microcircuits, Digital, Bipolar Programmable Logic, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten resistors as the fusible link or programming element. Two product assurance classes (B and S) and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/506 - Microcircuits, Digital, Bipolar, Programmable Logic, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic microcircuits which employ titanium tungsten (Ti-W) as the fusible link or programming element. A choice of case outlines and lead materials and finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/507 - Microcircuits, Memory, Digital, CMOS Ultraviolet Erasable Programmable Array Logic, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, erasable programmable array logic microcircuits which employ an EPROM cell as the programming element. Two product assurance classes (B and S) and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number (PIN). For this product, the requirements of MIL-M-38510 have been

MIL-M-38510/508 - Microcircuits, Memory, Digital, Cmos One-Time Programmable Array Logic, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, programmable array logic microcircuits which employ a one-time programmable EPROM cell as the programming element. Two

MIL-M-38510/51 - Microcircuits, Digital, Cmos, Flip-Flops And Latchets, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/52 - Microcircuits, Digital, Cmos, Nor Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/520 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor

This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor. One product assurance class (B) and a choice of case outline/lead finish are provided for each type, and are reflected in the complete part number.

MIL-M-38510/53 - Microcircuits, Digital, Cmos, Complimentary Pair Plus Inverter, And-Or-Select Exclusive Or Gates, Expandable 8-Input Gate Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/530 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor (Fixed Instruction)

This specification covers the detail requirements for a monolithic NMOS, silicon gate microprocessor.

MIL-M-38510/54 - Microcircuits, Digital, Cmos, Positive Logic, Four-Bit Full Adder, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits.

MIL-M-38510/540 - Microcircuits, Digital, N-Channel, Silicon Gate Monolithic 16-Bit Microprocessor

This specification covers the detail requirements for a monolithic N-channel, silicon gate microprocessor. Two product assurance classes and a choice of case outline/lead finish are provided for each type, and are reflected in the complete Part or Identifying Number (PIN).

MIL-M-38510/55 - Microcircuits, Digital, Cmos, Buffer/Converter, True/Compliment Buffer, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/555 - Microcircuits, Digital, Cmos, Remote Terminal Interface, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, remote terminal interface (RTI) microcircuits. One product assurance class (class B) and a choice of case outlines, and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/56 - Microcircuits, Digital, Cmos, Counters/Dividers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/57 - Microcircuits, Digital, Cmos, Static Shift Register, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/58 - Microcircuits, Digital, Cmos, Switches, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/59 - Microcircuits, Digital, Cmos, Decoder, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits. Two product assurance classes and a choice of case outlines , lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/6 - Microcircuits, Digital, Ttl, Binary Full Adders, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, full adder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/60 - Microcircuits, Digital, Ecl, Multiple Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/600 - Microcircuits, Digital, Bipolar, Semicustom (Gate Array) Devices, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Bipolar, semicustom (gate array) devices.

MIL-M-38510/605 - Microcircuits, Digital, Cmos Semicustom (Gate Array) Devices, Monolithic Silicon

eThis specification covers the detail requirments for monolithic silicon, complimentary oxide insulated silicon gate semiconductor, semicustom (gate array) devices. Two product assurance classes (B and S) and a choice of case outlines and lead finishes are provided for each type, and are reflected in the complete Part or Identifying (PIN).

MIL-M-38510/606 - Microcircuits, Digital, Cmos Semicustom (Gate Array) Devices, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, complimentary oxide insulated silicon gate semiconductor, semicustom (gate array) devices. Two product assurance classes (B and S) and a choice of case outlines and lead finishes are provided for each type, and are reflected in the complete Part or Identifying (PIN).

MIL-M-38510/607 - Microcircuits, Digital, Cmos Semicustom (Gate Array) Devices, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, complimentary oxide insulated silicon gate semiconductor, semicustom (gate array) devices.

MIL-M-38510/61 - Microcircuits, Digital, Ecl, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/610 - Microcircuits, Digital, Vhsic, Cmos, 65,536-Bit Selectable Mode, Static Random Access Memory (Sram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, 65,536-bit selectable operating mode, static random access memory microcircuits. These microcircuits conform to the functional throughput rate as defined in the phase I Very High Speed Integrated Circuit (VHSIC) program. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/615 - Microcircuits, Digital, Vhsic, Cmos, 4096-Bit, 4-Port Static Random Access Memory (Sram), Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, CMOS, 4,096-bit static random access memory microcircuits. The microcircuits herein conform to the functional throughput rate as defined in the phase I Very High Speed Integrated Circuit (VHSIC) program. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.

MIL-M-38510/616 - Microcircuits, Digital, Bipolar, Vhsic, Address Generator, Monolithic Silicon

This specification covers the detailed requirements for monolithic, silicon, address generator microcircuits.

MIL-M-38510/62 - Microcircuits, Digital, Ecl, And/Nand Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/620 - Microcircuits, Digital, Vhsic, Cmos, Signal Processing Element, Monolithic Silicon

This specification describes the requirements for VHSIC monolithic silicon, CMOS, Signal Processor Element (SPE) microcircuits.

MIL-M-38510/63 - Microcircuits, Digital, Ecl, Quad Translator, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/630 - Microcircuits, Digital, Cmos, Fft Processor Monolithic Silicon

This specification covers the detail requirements for a monolithic digital, CMOS, FFT butterfly processor microcircuits. Two product assurance classes are provided for and are reflected in the complete part number.

MIL-M-38510/650 - Microcircuits, Digital, High-Speed Cmos, Nand Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/651 - Microcircuits, Digital, High-Speed Cmos, Nor Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/652 - Microcircuits, Digital, High-Speed Cmos, And Gates, Or Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/653 - Microcircuits, Digital, High Speed, Cmos Flip-Flops, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part or identifying number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/654 - Microcircuits, Digital, High Speed, Cmos Latches, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/655 - Microcircuits, Digital, High Speed Cmos, Bus Transceivers With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/656 - Microcircuits, Digital, High-Speed Cmos, Flip-Flops, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/657 - Microcircuits, Digital, High-Speed Cmos, Buffer Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/658 - Microcircuits, Digital, High Speed, Cmos, Decoders, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, CMOS logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/662 - Microcircuits, Digital, High Speed, Cmos Data Selectors/Multiplexers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed, CMOS, logic microcircuits.

MIL-M-38510/663 - Microcircuits, Digital, High Speed, Cmos, Counters, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/665 - Microcircuits, Digital, High Speed, Cmos, Shift Register, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, high speed, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN).

MIL-M-38510/7 - Microcircuits, Digital, Ttl, Exclusive Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, quadruple 2-input exclusive OR gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

MIL-M-38510/70 - Microcircuits, Digital, Bipolar, Schottky Ttl, Nand Gaits, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, positive NAND logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/702 - Microcircuits, Linear, Regulating Pulse Width Modulators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, regulating, pulse width modulator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

MIL-M-38510/71 - Microcircuits, Digital, Bipolar, Schottky Ttl, Flip-Flops, Cascadable, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/72 - Microcircuits, Digital, Bipolar, Schottky Ttl, Nand Buffers, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, positive NAND buffer microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/73 - Microcircuits, Digital, Bipolar, Schottky Ttl, Multiple Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, positive NOR logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/74 - Microcircuits, Digital, Bipolar, Schottky Ttl, And-Or-Invert Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, AND-OR-INVERT logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/75 - Microcircuits, Digital, Bipolar, Schottky Ttl, Exclusive Or Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, quadruple 2 input exclusive OR gates microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/750 - Microcircuits, Digital, Advanced CMOS, Nand Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/751 - Microcircuits, Digital, Advanced Cmos, Nor Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).0.

MIL-M-38510/753 - Microcircuits, Digital, Advanced Cmos, Flip-Flops, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/754 - Microcircuits, Digital, Advanced Cmos, Latches, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/755 - Microcircuits, Digital, Advanced Cmos, Transceivers, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/756 - Microcircuits, Digital, Advanced Cmos, Flip-Flops, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/757 - Microcircuits, Digital, Advanced Cmos, Buffer Gates, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/758 - Microcircuits, Digital, Advanced, Cmos, Decoder/Demultiplexer, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/76 - Microcircuits, Digital, Bipolar Schottky Ttl, Cascadable, Shift Registers, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, shift register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/762 - Microcircuits, Digital, Advanced Cmos, Multiplexers, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/763 - Microcircuits, Digital, Advanced Cmos, Counters, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/765 - Microcircuits, Digital, Advanced Cmos, Shift Registers, Monolithic Silicon, Positive Logic

This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

MIL-M-38510/77 - Microcircuits, Digital, Schottky Ttl, Decoders, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky TTL, decoder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/78 - Microcircuits, Digital, Schottky Ttl, Arithmetic Logic Unit / Function Generators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, arithmetic logic unit / function generators. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/79 - Microcircuits, Digital, Bipolar, Schottky Ttl, Data Selectors/Multiplexers With Three-State Outputs, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, data selectors /multiplexers (three-state) microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/8 - Microcircuits, Digital, Bipolar, Ttl, Buffers/Drivers Open Collector Output, High Voltage, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, TTL, buffers/drivers microcircuits with open collector high voltage outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/80 - Microcircuits, Digital, Bipolar, Schottky Ttl, And Gates, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, positive AND logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/81 - Microcircuits, Digital, Bipolar, Schottky Ttl, Line Drivers, Monolithic Silicon

This specification covers the detail requirements for monolithic, silicon, Schottky, TTL, line drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/82 - Microcircuits, Digital, Bipolar, Schottky Ttl, Magnitude Comparators, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, Schottky TTL, magnitude comparator microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-M-38510/9 - Microcircuits, Digital, Bipolar Ttl, Shift Registers, Monolithic Silicon

This specification covers the detail requirements for monolithic silicon, TTL, shift register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

MIL-STD-1313 - Microelectronic Terms And Definitions (See Mil-M-38510)

This standard establishes a list of terms and definitions applicable to microelectronic devices and techniques.

MIL-STD-1331 - Parameters To Be Controlled For The Specification Of Microcircuits (Refer To Mil-Hdbk-1331)

MIL-STD-1562 - Lists Of Standard Microcircuits

This standard establishes the requirements for the selection of microcircuits used in the design, manufacture and support of military equipment and identifies those devices which are less acceptable for new designs because of their nonavailability or impending obsolescence, or their problem in performance, reliability or other characteristics.

MIL-STD-1772 - Certification Requirements For Hybrid Microcircuit Facilities And Lines (S/S By Mil-Prf-38534)

MIL-STD-1835 - Electronic Component Case Outlines

This standard establishes and maintains a compilation of electronic component case outlines and should be useful to all levels of manufacturing that culminate in the production of reliable and logistically supportable electronic equipment.

MIL-STD-883 - Microcircuits

This standard establishes uniform methods, controls, and procedures for testing microelectronic devices suitable for use within Military and Aerospace electronic systems including basic environmental tests to determine resistance to deleterious effects of natural elements and conditions surrounding military and space operations; mechanical and electrical tests; workmanship and training procedures; and such other controls and constraints as have been deemed necessary to ensure a uniform level of quality and reliability suitable to the intended applications of those devices. For the purpose of this standard, the term "devices" includes such items as monolithic, multichip, film and hybrid microcircuits, microcircuit arrays, and the elements from which the circuits and arrays are formed. This standard is intended to apply only to microelectronic devices. The test methods, controls, and procedures described herein have been prepared to serve several purposes: a. To specify suitable conditions obtainable in the laboratory and at the device level which give test results equivalent to the actual service conditions existing in the field, and to obtain reproducibility of the results of tests. The tests described herein are not to be interpreted as an exact and conclusive representation of actual service operation in any one geographic or outer space location, since it is known that the only true test for operation in a specific application and location is an actual service test under the same conditions. b. To describe in one standard all of the test methods of a similar character which now appear in the various joint-services and NASA microelectronic device specifications, so that these methods may be kept uniform and thus result in conservation of equipment, manhours, and testing facilities. In achieving this objective, it is necessary to make each of the general tests adaptable to a broad range of devices. c. To provide for a level of uniformity of physical, electrica...

MIL-STD-976 - Certification Requirements For Jan Microcircuits

This standard establishes the minimum requirements for the certification of manufacturing facilities/lines (s) used in fabricating, assembling, and testing high reliability JAN microcircuits in accordance with MIL-M-38510.

QML-38534-58 - Hybrid Microcircuits, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QML-38535-20 - Integrated Circuits (Microcircuits) Manufacturing, General Requirements For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-38510-94 - Microcircuits, General Specification For (S/S By Qml-38535)

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business